the abc225 series of open - frame power supplies, with its wide universal 90 - 264 vac input range and high power density, is available at 225 w of output power and a variety of single and multiple output voltages. the high efficiency and high power density of the abc family ensures minimal power loss in end - use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environm entally - friendly end products. these power supplies are ideal for telecom, dat acom, industrial equipment and other applications. ? 2 x 4 x 1 inches form factor ? 225 w with forced air cooling ? efficiencies up to 94% ? - 40 to 70 c operating temperature ? 12 v fan output, thermal shut - down feature ? 3.37 million hours, telcordia - sr332 - issue 3 mtbf ? standby power <0.5 w ? rohs compliant ? ce marked ? instrumentation ? lighting ? industrial applications ? applied computing ? renewable energy ? test and measurement ? robotics ? wireless communication
2 a bc225 series tech.support@psbel.com model number 1 description voltage max. load (convection) (112.5 w) max. load (convection) (120 w) max. load (13 cfm) min. load ripple & noise 2 abc 225 - 1t12l abc 225 - 1012l screw terminal molex connector 12 v 9.37 a 10.0 a 18.75 a 0.0 a 1% abc 225 - 1t15l abc 225 - 1015l screw terminal molex connector 15 v 7.5 a 8.0 a 15 a 0.0 a 1% abc 225 - 1t24l abc 225 - 1024l screw terminal molex connector 24 v 4.68 a 5.0 a 9.37 a 0.0 a 1% abc 225 - 1t30l abc 225 - 1030l screw terminal molex connector 30 v 3.75 a 4.0 a 7.5 a 0.0 a 1% abc 225 - 1t48l abc 225 - 1048l screw terminal molex connector 48 v 2.34 a 2.5 a 4.68 a 0.0 a 1% abc 225 - 1t58l abc 225 - 1058l screw terminal molex connector 58 v 1.94 a 2.07 a 3.88 a 0.0 a 1% cover - 225 - xbc 3 metal cover kit accessory specifications are for nominal input voltage, 25c unless otherwise stated. parameter description / condition specification input voltage universal (derate from 100% at 100 vac to 90% at 85 vac) 85 - 264 vac / 390 vdc input frequency 47 - 63 hz input current 115 vac: 230 vac: 2.2 a max. 1.1 a max. no load power typical < 0.5 w inrush current 115 vac: 230 vac: 264 vac: 25 a 45 a 75 a leakage current typical (n.a. for class ii option) touch current: 300 a <100 a power factor with full load >0.95 switching frequency pfc: pwm: 70 to 130 khz 50 - 80 khz 1 for class ii (without input earth pin) add suffix - 2 (e.g.: abc225 - 1012l - 2). ensure non - metallic mounting stud when installing a class ii product. 2 ripple is peak to peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 3 when used in cover kit, de - rate output power to 70 % under all operating conditions.
a bc 225 series 3 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.0055 4 _a g parameter description / condition specification output power 4 with 13 cfm: convection: 225 w up to 120 w efficiency 48 v: 24 v, 30 v: 12 v, 15 v: 94% 93% 92% hold - up time 225 w: 110 w: 10 ms 16 ms line regulation +/ - 0.5% load regulation +/ - 0.5% transient response 25% step load change, at 0.1a/ s slew rate, 50% duty cycle, 50 hz = 4% recovery time < 5 ms rise time typical 55 ms set point tolerance 5 +/ - 1% output voltage adjustment 6 +/ - 3% over current protection >110% over voltage protection 110 to 140% short circuit protection hiccup mode conducted emissions en55032 - b, cispr22 - b, fcc part15 - b pass radiated emissions en 55032 a; with external core (king core k5b rc 25x12x15 - m in input cable) pass level b input current harmonics en 61000 - 3 - 2 class d voltage fluctuation and flicker en 61000 - 3 - 3 pass esd immunity en 61000 - 4 - 2 level 3, criterion a radiated field immunity en 61000 - 4 - 3 level 3, criterion a electrical fast transient immunity en 61000 - 4 - 4 level 3, criterion a surge immunity en 61000 - 4 - 5 level 3, criterion a conducted immunity en 61000 - 4 - 6 level 3, criterion a magnetic field immunity en 61000 - 4 - 8 level 3, criterion a voltage dips, interruptions en 61000 - 4 - 11 criterion a & b parameter description / condition specification isolation voltage input to output: (for ite application) input to gnd: (not applicable for class ii option) 3000 v ac 1500 vac safety standard(s) approved to the latest edition of the following standards: csa/ul60950 - 1, en60950 - 1 and iec60950 - 1; class1 selv. agency approvals nemko , ul, c - ul ce mark complies with lvd directive 4 combined output power of main output, fan supply shall not exceed max. power rating. 5 fan supply output voltage tolerance including set point accuracy, line & load regulation is +/ - 10% and ripple & noise is less than 10%. 6 adjustment potentiometer is lo cated on the smt side of the pcb.
4 a bc225 series tech.support@psbel.com parameter description / condition specification operating temperature 7 start - up is guaranteed, with spec deviation, see fig. 1 - 40 to +70c - 40 to 0c storage temperature - 40 to +85c cooling with 13 cfm forced air cooling with natural convection cooling at 100 to 264 vac 225 w up to 120 w relative humidity noncondensing 5% to 95% altitude operating: nonoperating: 16,000 ft . 40,000 ft. reliability mtbf according to telcordia - sr332 - issue 3: 3.37 million hours convection load: 120 w up to 40 c de - rate between 40 - 50 c @ 0.625% per c de - rate above 50 c @ 2.33% per c forced air cooled load: 225 w up to 50c de - rate above 50 c @ 2.5% per c figure 1. derating curve figure 2 . efficiency graph at 115 vac figure 3 . efficiency graph at 230 vac 7 output ripple can be more than 10% of the output voltage.
a bc 225 series 5 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.0055 4 _a g connector pin description/condition manufacturer / pn ac input connector j1 pin 1 pin 2 pin 3 ac line not fitted ac neutral molex: 26 - 60 - 4030 mating: 09 - 50 - 3031; pins: 08 - 50 - 0106 dc output connector j2 pin 1,2,3 pin 4,5,6 v1 +ve v1 - ve screw terminal (option 1) molex: 39357 series or equivalent molex connector (option 2) molex: 26 - 60 - 4060 mating: 09 - 50 - 3061; pins: 08 - 50 - 0106 aux (fan) output j3 pin 1 pin 2 fan +ve fan - ve amp :640456 - 2 mating: 640440 - 2 parameter description/condition weight 200 g approx. dimensions 50.8 x 101.6 x 25.4 mm (2 x 4 x 1 inch) cooling 8 225 w with 13 cfm forced air cooling (refer mechanical drawing) up to 120 w with natural convection cooling (refer derating curve) figure 4 . mechanical drawing C screw terminal ( option 1) 8 225 w with 13cfm forced air cooling and 120 w with natural convection cooling at 100 to 264 vac.
6 a bc225 series tech.support@psbel.com figure 5 . mechanical drawing C molex connector ( option 2) notes: in case the pcb is mounted in a metal enclosure, using metal hardware ensure the following: 1 stand off, used to mount pcb has od of 5.4 mm max. 2 screws, used to fix pcb on stand off, have head dia of 6.0 mm max. 3 washer, if used, to have dia of 6.5 mm max. nuclear and medical applications - products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. specifications are subject to change without notice.
|
